Usage areas
- It is suitable for preparing molds for applications such as epoxy, polyurethane, polyester, plaster, candle, soap, clay, cement, etc.
Product features
- Packaged in a 1-kilogram set of components A and B.
- It has an easy mixing ratio. 1:1 both by volume and weight
- More than 20 epoxy castings can be made
- Working time: 30 min
- Curing time: 5 hours
- Hardness: Shore A 40
- Odorless, smokeless
- Free of BPA and volatile substances
- Solvent free
- Medium viscosity
- Can be used at room temperature
Usage
Mix the two products packaged as A and B components together. Mix at a slow speed until a homogeneous and smooth image is obtained. Pour it into the mold to be applied and let it dry.
Considerations
- The product has two components and cannot be used without mixing the components.
- It has a shelf life of 6-12 months under appropriate storage conditions. We recommend that you use the product early without waiting too long.
- Never heat the product during mixing and application.
- To obtain a completely foam-free result, use a vacuum machine.
- You can use a precision scale or measuring cup to measure.
- For whatever reason, do not mix any other materials that do not fit the system into the product.
- Make sure that the equipment you use during the application is dry and clean.
- Try to use it at constant ambient temperature (between 18-25) as much as possible.
- You can use a mold release agent to make it easier for the product you cast to come out of the mold.
- Do not forget to use work safety equipment.
- Avoid contact with your skin.
- Store the product you are not using in a closed area at 10 and 30 C degrees, away from direct sunlight.
- Do not keep the products open. Try to minimize contact with air.
- Do not leave the products obtained as a result of the mixture under direct sunlight.
All of the information is given as a suggestion to get the best results from the application. It is the user’s sole responsibility to use the product for its intended purpose.
